Mechatronics and optomechatronics form the basis of many advanced systems in sectors such as the semiconductor industry, medical technology, aerospace and precision agriculture. To make these systems increasingly accurate and reliable, this call under the Knowledge and Innovation Covenant (KIC) brings together researchers, businesses and other societal stakeholders in interdisciplinary consortia.
The five selected consortia are investigating, amongst other things, how artificial intelligence can support the design process, how precision systems can be made more stable, and how sensors and measurement methods can be further improved. Research institutions are working closely with a wide range of companies on these projects, from major high-tech players to specialised SMEs, including ASML, Airbus, VDL ETG, KMWE, FSO Instruments, Delft Dynamics, Engineering Masters, Benchmark, Brighter Signals, TQ-Group, Shadow Robot, JBT Marel, Royal Kaak, Demcon, STT Products, Siemens Industry, K. Peeraer, Ansys, MathWorks, Menicon, AAE, Frencken Mechatronics Europe, Affix Engineering, Prodrive Technologies and Van Swinden Laboratory.
A significant contribution to the Mechatronics & Optomechatronics action agenda
The call theme was proposed by the KIA ST and stems from the in-depth programme and the seven innovation programmes of the Mechatronics & Optomechatronics Action Agenda set out in the National Technology Strategy (NTS). The funding awarded to these projects makes a significant contribution to the knowledge base of the action agenda.
Many of the projects that have been awarded funding relate to other NTS priorities, such as Semicon Technologies and AI & Data, and are aligned with the targeted market programmes Semicon and High-tech Mechanical Engineering. They focus on applications in robotics, medical technology, drones and satellite communications.
The projects awarded
Mechatronic Optimization of the System Architecture: from Idea to Controlled Solution (MOSAICS) – Prof. dr. ir. Theo Hofman (TU Eindhoven)
Co-applicants: Dr Ron de Bruijn, Dr Pascal Etman (both TU/e), Dr Nandini Bhattacharya, Prof. Matthijs Langelaar (both TU Delft)
Co-funders: ASML, FSO Instruments, Airbus, VDL ETG, KMWE, TNO
Collaborating partners: Delft Dynamics
The MOSAICS project focuses on improving the way in which high-precision technological systems are designed and built. These systems are used in applications such as drones, satellite communications and semiconductor equipment. Through collaboration between universities and businesses, the project is developing smart design tools utilising AI and advanced simulations. The aim is to make the design process faster, cheaper and more reliable, so that innovative high-tech systems can be realised more easily.
DESIGN-R Co-design and actuation and tactile sensing technologies for manipulation in unstructured environments – dr. ir. Wesley Roozing (Universiteit Twente)
Co-applicants: Dr Jan de Jong, EngD (UT)
Co-funders: Engineering Masters, Benchmark, Brighter Signals, TQ-Group (Germany), Shadow Robot (United Kingdom), JBT Marel, Royal Kaak
Many Dutch sectors, such as the agri-food and manufacturing industries, have an urgent need for robots to address labour shortages and rising demand. Current robots are difficult and expensive to design for real, human-centred environments. The DESIGN-R project tackles this problem by developing better methods for designing robots that can handle tasks, objects and circumstances safely and reliably. By combining new design methods with improved robot components, sensors and tested prototypes, it helps engineers to build grippers and manipulators more efficiently. Through close collaboration with industrial partners and the development of open-source tools, the project delivers benefits for society and the economy.
CUT4CARE - Predictive Process Monitoring and Steering for Ultra-Precision Manufacturing of Medical-Grade Soft Contact Lenses – dr. Liangliang Cheng (Rijksuniversiteit Groningen)
Co-applicants: Prof. Bayu Jayawardhana, Prof. Francesco Maresca, Dr Andrea Giuntoli (all University of Groningen), Dr Hassan Hossein Nia Kani (Delft University of Technology), Dr Willem Jellema (SRON)
Co-funders: Demcon, STT Products, Siemens Industry, Flanders Make (Belgium), K. Peeraer BV (Belgium), Ansys, part of Synopsys (France)
Collaborating partners: Healthy Technology Research & Public Knowledge Institute, Queen Mary University of London (United Kingdom), MathWorks (United Kingdom)
The growing clinical demand for bespoke medical contact lenses – driven in part by myopia control in children, keratoconus and other complex corneal conditions – is increasing the pressure for reliable and traceable production. With soft contact lenses, quality is established during dry machining, but is only assessed after hydration. This leads to late fault detection, additional remakes, waste and less predictable delivery times. CUT4CARE addresses this bottleneck by combining multi-scale modelling, multimodal sensors, in-situ optical metrology and constrained process control. Validation takes place on Menicon’s Automated Lens Production (ALP) line, with the aim of achieving better traceability, higher first-pass yield and more efficient, EU MDR-compliant production.
ARCADE - Architectural Reasoning and Collaborative AI for Design in Engineering – dr. Jakup Ratkoceri (Universiteit Twente)
Co-applicants: Prof Dr G. Maarten Bonnema, Dr Saber Darmoul, Dr Petra van den Bos (all UT), Dr Michiel van Osch, Dr Erik Puik (both Fontys)
Co-funders: VDL ETG T&D, ASML, AAE B.V., Frencken Mechatronics Europe, Affix Engineering B.V.
Collaborating partners: TNO ESI, Brainport Development
ARCADE (Architectural Reasoning and Collaborative AI for Design in Engineering) addresses the problem in the high-tech and optomechatronics industries that systems are becoming increasingly complex. Decisions taken early in the design process regarding the system’s architecture have a major impact on the final result, but are inevitably based on uncertain and incomplete information. Architectural Reasoning forms the basis for such decisions. Support for Architectural Reasoning is currently still limited: it relies primarily on human expertise. This project aims to develop support that utilises both human and artificial intelligence (AI) capabilities.
PicoDrift: Ultra-Stable Interface design for Next-Generation Opto-Mechatronic Systems – dr. ir. Leonard Antonino (Lennino) Cacace (TU Eindhoven)
Co-applicants: Dr Ron de Bruijn, Dr Frederik Van Loock, Dr Lambèrt van Breemen, Dr Olaf van der Sluis (Eindhoven University of Technology)
Co-funders: ASML Netherlands B.V., TNO, Prodrive Technologies B.V., Van Swinden Laboratorium B.V.
Modern high-tech machines require extremely stable positioning, often accurate to within a few billionths of a metre. However, mechanical and/or adhesive joints between components can slowly shift over time, limiting the system’s performance. This project brings together industry and research institutions to better understand and predict these small movements, and to develop strategies to prevent them. By systematically studying materials, surfaces and joining methods, we are developing practical design guidelines for more stable and reliable precision systems for future technologies.